Steps to Drain Your Washer/Dryer Combo:
- Place a Pan Under the Drain Pump Filter:
Position a flat pan beneath the drain pump filter to catch the water as it drains. - Pull Out the Black Hose:
Locate the black hose next to the drain pump filter. Remove the plug from the hose and allow the water to drain into the pan. - Repeat as Necessary:
Empty the pan and repeat the process until all the water has drained. Ensure the hose is completely dry before putting the plug back in place. - Try the “Spin and Drain” Cycle:
If the washer/dryer combo still isn’t draining properly, try unplugging the unit from the socket. Wait about 30 minutes, then plug it back in and run a “Spin and Drain” cycle.
For more information and a video explaining the steps please click the following link below:
Please note that this procedure should be done every 2 weeks to a month to ensure that the washer/dryer will drain properly.